The History of Jade

The History Of Jade

Jade or jadeite, to be precise, has always been revered Asians as a symbol of good luck, good health and strength to resist evil spirit. In addition very mythical character of the stone, and despite the many misconceptions about what can be called by this term, jade, pearl luster and rigid and stable nature, remains a very precious value conscious and conscious of the Status equal Despite the fact that the Chinese have had an affair with Jade over the past thousands of years, the largest jade deposits are not in China, and on top of Burma, which exports raw jade (Myanmar Jade) to China and Hong Kong, in particular, for further processing.

Read Also: Myanmar Ruby Land : Mogok

Jade has been prized in China as the gemstone, "yu" real for 5,000 years. Jade character resembles a capital I with a line through the center: the top represents the sky, the bottom of the earth, and the central part of humanity. The word "yu" is used in China to call something precious, as in English we use gold. Jade was thought to preserve the body after death and can be found in Imperial tombs for thousands of years. A tomb contained all the garment made of jade, to ensure the physical immortality of its owner. For thousands of years, jade was a symbol of love and virtue, as well as a symbol of status.

In Central America, the Olmecs, Mayans, Toltecs all were also engraved with jade and used for carvings and masks. The Aztecs were a tax on jade, which unfortunately led to the recycling of previous works.

Read Also: Arts And Crafts Typical From Myanmar

The history of jade in Europe is not so different. Although prehistoric shafts and jade carved leaves were found by archaeologists, most Europeans were not familiar with jade as a gemstone jewelry for use until the sixteenth century when jade objects were imported from China, and Later in Central America.

The Portuguese, who brought home pieces of jade from their settlement in Canton, China, called jade "piedre de ilharga", or stone spines, because they thought this strong medicine for kidney disease. Jade was brought back to Spain from the New World were named the Spanish version of the phrase "Piedra de hijada". It was the French "ejade", and then, finally, the jade.

Read Also: How To Use Thanaka?

How To Use Thanaka?

How To Use Thanaka

Thanaka Facial Mask

It mixes 1-2 cups of the same amount of pure Thanaka powder until it forms a creamy paste. Apply cream evenly on cleansing face. Depending on its thickness, the mask will dry after 5 to 10 minutes. The mask can easily be rinsed off with lukewarm water after 20 minutes. We recommend one or two applications per week. As a result, your skin has a soft, smooth, uniform tone.

Read Also: Benefits of Myanmar Thanaka Powder And Kusumba Oil

Face Powder

Keep your face has been toned and hydrated use makes the Face Pure Thanaka Powder Puff (so your facial hair will not stand up) so that a large powder brush gently circles. Before applying to remove extra powder, push the powder with a brush on the edge of the jar. This face powder not only makes your skin look more beautiful but it does not protect it from Thanakas skin protection characteristics due to harmful environmental influences.

Read Also: Secret of Beauty: How to use Thanaka Powder?

Facial Cleansing

It mixes 1-2 cups of pure  Myanmar Thanaka powder with 3 teaspoon of water to form a liquid, paste. Evenly apply cleanser - paste and scrub massage / to gently cleanse your skin. Cleansing wash off face with warm water. Cleansing releases the skin from light corn, excess sebum and dirt particles.

If you want to buy Myanmar Traditional Thanaka, visits at bagantrade.com, which is Myanmar's first and the only B2B trading platform that engage local and global market.

Read Also: What is Myanmar Thanaka?

2017 International Agricultural Machinery And Food Expo in Myanmar- BaganTrade

You can see the details in following links: http://bagantrade.com/agricultural-machinery-expo

How to Acid Stain a Concrete Wall

When it comes to acidic dyes and concrete walls are unique challenges. Most of acid dirt available for concrete water consistency. When you try to apply that acid dyeing to the wall, it will not adhere, but will run down the wall and will be on all the floor. If you would like to add depth and color to your concrete wall, there is a solution, nonetheless. To achieve a beautiful acid-stained smart concrete wall, perform the following steps.

Look for a supplier to color the concrete acid gel. If you are searching on the internet, enter "gel concrete acid stained" Source gel Specific acid stain is included in the following resources.

Select color or colors. Concrete acid dyeing work by chemical action on concrete. These acid stains made from natural minerals. Although the colors are limited, they perform a lush brown range like avacado. You can apply a second coat to change the appearance of a specific color or achieve a dark color by overlaying mixed colors with other colors. Please note that cement only, acidic dyes will not work with sand or rock. If your "concrete" wall is a mixture of rock and concrete, you can not get the required appearance by acid staining.

Prep the wall. Acid dyeing can not be used if the wall was previously waterproofed. If your concrete wall has some paint residue, varnish or adhesive, apply paint or adhesive strippers made to remove the problem residue before applying dirt it must be used. Including residues or arbitrary regions will not accept any acid dyeing if it affects the color of your acid dyeing or is not properly deleted.

Prep your work area. Because you are working with an acid, which could damage any surface you want to mask, cover any surrounding surfaces you want to mask and protect. If you are working indoors, the floor near your concrete wall, wooden trim and ceiling should be covered. If you are working with a retaining wall on the street, if you are not staining the surface as well, you would like to cover concrete walking under the wall.

Please wear protective clothing. You need rubber gloves, old working clothes, sunglasses, and apply gel concrete acid dyeing. You are working with acid. When it stains your clothes, if you happen to contact with him, it will irritate the skin and eyes.

Also read: What is Autoclaved Aerated Concrete (AAC)?

Apply gel stained acid concrete. Gel dyeing has consistency of thickness pudding. I believe it is easy to operate with the help of putting some paint into the tray. To apply dirt, please use foaming brush or paint pad. If you are using one color, apply a uniform layer all over. A Gallon of gel acid stain contains from 200 to 300 square feet, depending on how your porous wall is. Depending on the type you want, if you are using two colors, you can overlap random patterns to create a "marble" appearance. You can even use their creativity to make the patterns like sun, diamond, or something more complicated.

The gel hardens the concrete acid dyeing on the wall according to the instructions on packaging. Cure time within the range of the minimum value from 2 to 8 hours. If you work outdoors on a concrete, make sure the wall is protected from rain and water during curing time. Wall treatment modifies the appearance of white residue and color on the wall you notice puff. This is normal.

Neutralize the concrete acid stain. After curing, time has passed, you are a mixture of sodium bicarbonate and water, you can neutralize acid dyeing. Please use 1 or 2 tablespoons of sodium bicarbonate per gallon of water. I use a pump up sprayer and spray the mixture of baking soda on the wall from the top down. I used a large sponge soaked the sponge mixture so that it sprayed like running down the wall and not compromising the following colors. Assistant store VAC is used to collect lips-free mixture. If you are working with the outside of the wall and not very concerned about the mess, you can saturate the mixture and the concrete walls with your own spray bottle.

Also Read: How To Build a LED Light

Please clean the wall. When you neutralize the wall, it cleans the wall and uses clean water to remove all the residue. Use a nylon brush to remove stubborn residues.

It can be dried. The walls are allowed to dry thoroughly before sealing. This may take up to 24 hours depending on the climate.

I admire the wall of a new acid dyeing concrete! Acid Dyeing The wall of concrete is easy and fun to do. Once you master the art of acid-dyed concrete, all the walls of your home may be concrete!

If you want to buy light weight concrete wall in Myanmar, join with Smart Precast Company, which is one of the leading manufacturer of AAC Block and APC Block in Myanmar. You can view information and buy concrete block at baganmart.com, which is Myanmar B2B e-commerce platform and Myanmar online shopping for business products buyers.

Also Read: Homemade Lightweight Concrete Blocks

How To Build a LED Light

When you create a simple LED light, you can become a great project for children and adults who just learn the electronics. LED light can be built using a simple circuit with an LED, consisting of a resistor and a battery. After the LED lights were soldered together, which was held the opening for the battery and LED, it can be placed almost all of the plastic housing. Resistors, are used to regulate the flow of current through the LEDs. Also a large amount of current can cause permanent damage to the LED too.

Step 1 - To one end of the resistor 1K ohm and connect the red line on the battery holder.

Step 2 - Solder the free end of the resistance to the LED of the positive lead. The positive terminal of the resistor is usually longer than the negative terminal.

Step 3 - Pin the black line of the battery holder to one wire push-button switch. Solder the lead of another push button on the negative side of the LED.

Step 4 - Connect the battery to the battery holder. When you press the switch button, LED will light up.

Step 5 - If there is a need to mount the LED light to the selected container, remove the battery.

If you want to view information and buy lighting products in Myanmar, join with Changi-Light Myanmar company, which is one of the leading electrical products trading company in Myanmar.

You might also like -

• How to Wire a LED Light to a Switch
• What is Myanmar Thanaka?
• What is Autoclaved Aerated Concrete (AAC)?

What is Myanmar Thanaka?

What is Myanmar Thanaka?

In Myanmar, girls and women used Burmese tree bark thanaka finely ground for centuries on skin cream embellishments and protective called simply Thanaka. Gold color Thanaka available in all markets in Myanmar and is used by young and old.

Skin benefits of Thanaka

Natural ingredients of Thanaka help the skin to defend itself, of course, from the harmful UV rays and reduce moisture loss. In addition, a study by the University of London and Bangkok, it was found that a high concentration of antioxidants and the barks anti-inflammatory properties rejuvenate the facial skin.

Effect and Application

Myanmar Thanaka has strong anti-inflammatory, an important antioxidant, mild tyrosinase inhibition and antibacterial activity. Furthermore, Thanaka contains an active ingredient marmesin which serves as a natural UV-A protection. Traditionally, Thanaka used as a mask by crushing the shells, wood or Thanaka roots of trees with a small amount of water on a circular stone slab called Kyauk Pyin to form a liquid paste.

Usage in the Beauty Industry

Thanaka used for all types of skin care and color cosmetics, such as:

• facial masks
• thanaka creams
• skin foundations
• soaps
• body lotions
• perfumes

If you want to buy Myanmar Traditional Thanaka, visits at bagantrade.com, which is Myanmar's first and the only B2B trading platform that engage local and global market.

You might also like -

• The Best Advantages of SMEs
• What is Autoclaved Aerated Concrete (AAC)?
• Bagan Travel Guide: Essential Travel Tips for Bagan, Myanmar

What is Autoclaved Aerated Concrete (AAC)?

Autoclaved Aerated Concrete (AAC)

Autoclaved Aerated Concrete is a kind of precast products, made from all natural ingredients to achieve high efficiency and excellent performance benefits. For just as in 1914, the Swedes discovered a mixture of cement, lime, water and sand, just like regular concrete buy adding aluminium power. This last material gives the Autoclaved Aerated Precast Concrete expansion properties.

Lightweight precast concrete containing air bubbles throughout the material, which in autoclaved aerated concrete block, to obtain a low density of lightweight materials in an autoclave oven.

Can be cut with a saw blade, it manages to be able to easily perforated. The reason for its characteristics, compressive strength of concrete, moisture content, bulk density test, you need to check for shrinkage tests. In particular, it is possible to use walls, floor, roof panel block, the lintel.

Properties of Aerated Concrete

Autoclaved Aerated concrete block, solid block of lightweight associated with the adhesive, has been reinforced with additional steel strength. AAC has a very high insulation value ensures excellent sound insulation barrier, for this reason, they are used in the construction of the above type. Extra large solid rectangular prism, the precast autoclaved aerated concrete wall laid with a mortar with a thin layer, there has been autoclaved. Installed units shall be protected from direct exposure to moisture by using a coating material.

Aerated Concrete Benefits and Applications

When using the AAC are some of the benefits that you get is the following:

• Excellent thermal protection, at about 1.25 inches. The thermal conductivity of 6 to 7.5% that of conventional concrete, is to make a very energy-efficient.
• Since it has a high heat resistance, AAC will have a lower cost of energy.
• Excellent soundproofing material and acoustic insulation.
• Aerated concrete provides fire and termite resistance.
• AAC is manufactured in a variety of shape and sizes.
• AAC blocks store and release energy over time.
• The aerated concrete is recyclable.
• Route chases can be cut to install electrical and plumbing rough-in.
• Extremely lightweight block stacked like conventional CMU.

You might also like -

• How Does A Crane Work?
• What Is an SME Business?
• Characteristics Of SMEs

Myanmar's First B2B E-Commerce Trading Platform Bagan Hub Plans To Raise New Funds

Myanmar B2B

Bagan Hub Co Ltd, a local startup business-to-business trading platform which start BaganTrade.com, it began a new platform, as it seeks to expand its e-commerce business and to get fresh capital.

BaganTrade offered about 600 local companies, and has a 30,000 page views per month. The best part is that international companies can conduct research directly to buy products made in Myanmar.

Its most recent two months, the company was formed BaganMart.com ago after raising $ 100,000 from a local investor, and focuses on the B2B promotion in sectors such as construction, industrial and electrical products.

"We are studying to get to make payments directly from our platform. We still need to prepare for logistics, payment systems, to make it happen. BaganTrade may take more time," said Pyie Phyo Paing, founder and CEO of Bagan Hub Co Ltd.

Paing said that the idea of creating a B2B trading platform to help directly connect suppliers with international buyers, where the space for future growth.

"The currently scenario is that products from Myanmar are sold indirectly in the international market. Suppliers of the country, they can not get a good price. Local providers also lack the internet on the basis of knowledge. We want to fill the gap and become a bridge for external markets, "said Paing to DEALSTREETASIA.

Paing, 35, originally started the site with its own capital of about $ 40,000 in June 2015, increased approximately K$40,000 Nay Min Thu, founder iMyanmar House, and after a year, in mid-2016, has received capital investments of approximately $100,000 from Arkar Soe, as an individual investment. Paing completed his studies in Computer Integrated Manufacturing NTU in Singapore.

Today Bagan Hub, Myanmar SMEs, has a value of approximately $2.5 million and is negotiating a foreign investor for an additional investment of $500,000.

BaganTrade's average transactions ranging from $1,000 to $3,000, according to data collected from local suppliers.

Some of the products produced by the majority of e-mail requests include agricultural products, such as peas and corn products while the actual orders were more Shan traditional bags products, such as handbags, shoulder bags.

They have got about two paid members so far for each website and marketing plan in the near future to make the payment system, said the founder. The paid suppliers will be checked carefully before upload on the site.

Challenges such as the need to train local suppliers to use email to communicate, posting pictures on the platform remain. However, if necessary, BaganTrade help in answering questions.

"We need to use more labour," said Paing about reaching out to the local suppliers through telephone at times email or messaging does not attract them.

"Currently, our platform is only on stage as an advertising platform, while in the long term, we will try to get orders directly through the website," said Paing. His team consists of 21 people, an increase of five since June 2015.

Ref: DEALSTREETASIA

Also Read:

• What Is an SME Business?
• Advantages & Disadvantages of B2B
• How to Start a Business With No Money

Bagan Travel Guide: Essential Travel Tips for Bagan, Myanmar

Bagan Travel Guide: Essential Travel Tips for Bagan, Myanmar

A trip to the iconic picture perfect and Bagan is a must-do for any adventure Myanmar. Our memories of the pagoda and the temple filled landscape Sunsets, sunrises and endless sun and cycling in the morning on the dusty roads of Bagan remain with us forever. Sunrises and sunsets, what to pack for an adventure Bagan, here is our Bagan travels and tours in myanmar guide the top tips to help you plan your visit to Bagan is great!

The Bagan Temples and Pagodas

1) RESEARCH THE TEMPLES AND HAVE A SUNRISE, SUNSET AND VISITING SHORTLIST

Bagan is home to the 2200 temples and pagodas, and it is very unlikely that you will have time to visit each and everyone! Do your research ahead of time and make a list. Our favorite sunrise temple was and North Lowka Oushang topped our list Gouna sunset. During the period, we reduced our favorites daytime pagodas to Shwezigon Pagoda, Bupayathein and Ananda.

2) VISIT A PAGODA OR TEMPLE EVERY SUNSET AND SUNRISE YOU ARE IN BAGAN!

Not every sunrise and sunset are the same, but many in Bagan absolutely spectacular. We tucked into the two sunrises and sunsets 3 during our stay Bagan and meanwhile sunrises were exceptional, only one of our sunsets was worthy of a postcard.

If a hot air balloon ride on your bucket list of dawn balloon rides is very popular in Bagan and equally surprising, like a balloon after balloon drifts over the temples.

Sunrise Balloon Ride

3) STICK AROUND AND EXPLORE THE PAGODAS AND TEMPLES AFTER SUNRISE

Sunrise in Bagan usually requires middle of the night wake up of call, so it is understandable that when the sun rises there is a mass exodus of the crowd returning back to your hotel for some well-deserved naps and breakfast. Resist the temptation! A few hours after sunrise, is an excellent opportunity to take some amazing light in the now deserted temples!

4) LOOK INSIDE THE TEMPLES AND PAGODAS!

Bagan is known for its spectacular views from the roof of the countless temples at sunrise and sunset, but inside the temples and pagodas worth a visit too. Reclining Buddha, stone carving and stone statues in abundance along the temples and pagodas of Bagan. Our favorites were Sulemani and Manuha for indoor adventures.

5) TEMPLE SELLERS

There is no way to avoid the souvenir and elephant pant sellers, which is often visited every dawn, dusk, and in the medium term, the most popular temples of Bagan. Many of them are young children who have polished their sales technique and is very easy to feel that you need to buy one and all. If it does, a firm NO goes a long way to be left alone to enjoy the experience.

Temper Sellers

6) FAMILIES WHO LOOK AFTER THE PAGODAS AND TEMPLES

Temples and pagodas are opened and closed by the families who live on nearby land and are responsible for key temple. Tipping opening sunrise and remain open to the sun, it is considered a kind gesture. Their children are also susceptible to light up the dark stairs with candle light and request a present. Accepted to give a little without their services, sunrises and experience will be a very different experience.

7) MIND YOUR HEAD!

Temples are definitely not built for anyone over 5 feet! Watch your head and wait to pass through small spaces to reach the top. There is often a lot of climbing involved in getting to the prime sunrise and sunset positions and sometimes great heights have to be scaled! I'm not a big fan of heights, but there are a lot of defensive walls, which made the experience much easier!

8) BRING A TORCH OR A HEADLAMP

A significant part of Bagan adventure takes place at dawn and at dusk. So, to put it more clearly in the dark! Flashlight or headlamp is essential to successful navigation pre-sunrise and after sunset in Bagan streets and sidewalks, stairs and dark temple. Place a flashlight on the top of your packing list!

9) DRESS CONSERVATIVELY FOR TEMPLE AND PAGODA VISITS

Most people dress conservatively and cover their shoulders and legs, in spite of the high temperatures. Knee shorts, skirts, elephant pants and t-shirts our choice of clothing. They are often recommended and used to enter the temples and pagodas. We did see short shorts and vests tops but we felt more comfortable keeping in line with the locals.

10) FLIP FLOPS ARE ESSENTIAL

Each temple and pagoda requires bare feet, flip-flops and their visitors are the easiest option. You will notice that every Burmese people legs decorated flip-flops, probably because it is not fun to play with the laces in the dust and heat! Wet wipes may also be used for cleaning the said bare feet after visiting the pagodas!

11) A BAGAN DAY TRIP: MOUNT POPA

Mount Popa is a popular day trip from Bagan. Popa Mountain is a sacred mountain temples glittering gold precariously on top of an extinct volcano. 777 steps lead to the top of the path, not only are the steps climbed in the temperature of 40 degrees, which are also filled with many monkeys in search of food!

Mount Popa

So there you have it: our guide to Bagan with essential tips for a perfect Bagan adventure in Myanmar. If you want to visit Bagan, join with Everlasting Travels and Tours Co., Ltd, tours in myanmar, formed in 2013, founded the local citizens and foreign visitors traveling convenient and smooth with the intention of traveling to the establishment.

You might also like-

• What Is an SME Business?
• How Does A Crane Work?
• Characteristics Of SMEs

How Does A Crane Work?

How Does A Crane Work?

What is a crane?

Crane is a mechanism that uses a simple set of lifting and lowering objects the machine and to move in the horizontal direction. They are always equipped with at least one winding; cables, ropes or chains; and pulleys. Both pulleys and winder are a form of a pulley.

Lifting

Cranes may use a combination of simple, to get the advantage and lifting machines, mechanical objects. A first lever which is used in the balance-style crane. Girder overhead crane is balanced on a fulcrum that allows you to lift heavy objects with fewer forces. The second style jib crane, which uses pulleys to achieve a mechanical advantage (but note that all cranes use pulleys - in this case, the pulleys are the main source of mechanical advantage). A third method of the crane can lift the objects by a hydraulic cylinder, either directly or by feeding or balance the antenna.

Horizontal Movement

The horizontal movement of the crane can be done one of two ways. First, to install all the device on a rotating axis, and a swing arm or around a supporting beam. This is very common in mobile cranes and derricks used in some building. The second method is to roll the load back and forth on rails along the pen itself. This is very common in stationary cranes in ports and railway stations.

Stability

A final consideration in the operation of cranes is stability. The crane is stable when the sum of all movements on the basis of zero. In practice this means that the size of the nominal load the tap must be less than what would be necessary to tilt the valve. In the United States, the mobile crane can pick up only 85 percent of what it would take to tip the crane bowl. This stock should take into account the potential of the mobile crane happens to sit instability. If you want to buy cranes in myanmar, visits baganmart.com, which is myanmar B2B e-commerce platform and myanmar online shopping for business products buyers.

You might also like-

• How to Set Up a Construction Site Crane
• The Best Advantages Of Electric Hoist
• How Does a Portable Generator Work?

What Is an SME Business?

What Is an SME Business?

Small and medium-sized businesses in favor of small and medium-sized enterprises, or SMEs. Although the company is widely recognized as a category, there is no single definition of what constitutes an SME. The criteria vary depending on the location of the company, the industry in which it operates and the purpose of classification.

Criteria and Thresholds

Different definitions of what constitutes an SME based on quantifiable and comparable, for example, number of employees, the level of sales revenue criteria for a certain period, turnover or assets. Thresholds is then installed on each criterion based on the economic structure and industrial heritage. Branches may affect the threshold, as in the US and Canada models. Other methods of categorizing ignorance of the industry, such as the definition of small and medium-sized enterprises, issued by the European Commission.

Economic Importance

Myanmar SMEs play an important social and economic role. Promoting innovation and entrepreneurship and use a significant part of the workforce. SMEs account for 98 percent of businesses in Canada and the use of 48 percent of the workforce. In the European Union, 99 percent of enterprises are defined as small and medium enterprises- SMEs, providing 90 million jobs. Because of its economic significance, SMEs can gain access to system support and financial assistance for large organizations.

United States

In the United States, the Small Business Administration issued standards that determine the size of a small business by establishing the maximum number of employees or annual revenue. In addition, the organization must be independently owned and operated and is not dominant in its field nationwide. The SBA size standards vary depending on the industry in which the company operates meets North America Industry Classification System. At the SBA website includes a table that provides a full breakdown of industry standards.

Canada

Industry Canada defines SMEs as companies with less than 500 employees. In order to be classified as "small" companies producing goods must be less than 100 employees, and service-based business must have at least 50 people.

Europe

From 1 January 2005, the European Commission adopted the definition of SMEs, to consistently apply to all Member States, the European Investment Bank and the European Investment Fund. The European Commission classifies the company as an SME, if an organization is not an independent subsidiary, which employs less than 250 employees with less than 50 million euros or balance sheet not exceeding 43 million euro turnover.

You might also like-

• Advantages & Disadvantages of B2B
• Top 5  Social Media Platforms for Myanmar Business
• Type Of Diesel Generators

How Does a Portable Generator Work?

How Does a Portable Generator Work?

Portable generators are commonly used during power outages to keep certain elements of your home or commercial property runs continuously until the power is restored. At home, these items may include refrigerators, lighting and heaters.
There are many sizes of generators in myanmar, some small and some large. Portable generators are generally more for home or small business. They just need to be connected to the house, and then all that a person chooses to connect to work, if you have the correct power.

How much power a generator can supply depends on the wattage - the higher the power, the more equipment  it can keep running. Also, remember that more watts is required to some extent, as long as it does to keep it running, so you either have to stagger the start time of your instrument, get the big generators or to run certain things at a certain time and turn them off to start another.

The smaller the generator, the easier it is to move. Nevertheless, many of the larger models are supplied with sets of wheels, that make them so mobile.

Some models can be initiated manually, while others come with an easy to use electric starter.

They come in sizes up to 900 watts which can be used for camping, up to 17,000 or higher range, which could take home. Portable generators run on anything from diesel, propane or gasoline.

Exhaust from the generator can produce toxic carbon monoxide that can kill, if concentrated in relatively high levels. When using a generator, be sure to put in a well-ventilated area.

Other problems include the heat generated by the equipment and a possible electric current.

Avoid the use of the generator in wet areas, and can be used in the rain, if necessary, make a shelter to keep as much water away from it as possible. If you want to views details and buy generators, visits at baganmart.com, which is myanmar business network and myanmar B2B e-commerce platform.

You might also like-

• How To Re-Varnish Rattan Furniture
• Compressed Air Dryer & Filter Installation
• How to operate CNC machines

How to Re-Varnish Rattan Furniture

How to Re-Varnish Rattan Furniture

Rattan furniture is one of the myanmar furnitures. Rattan furniture is similar to wicker, but uses thicker strings, harder wood to form the shape of the part. Rattan furniture, usually either polished or painted (with varnish or polyurethane) to protect the wood from moisture and wear. When a varnish on rattan begins to fade, the wood itself becomes vulnerable to damage from moisture and other problems, it is important to clog. The preparation includes getting a very clean piece and lightly sanded so new glow stick.

Fill the bucket with a gallon of warm water with a little soap for washing dishes. Scrub down the entire cabinet, allowing water to penetrate into the wood fibers. Rinse the piece well with clean warm water. Allow it to dry completely in a few days, preferably in the sun. The design of the furniture should shrink and harden as it dries.

Sand the entire surface of a piece of sandpaper 260-grit. Fold the paper, if necessary, to enter into all the cracks. Use a hair dryer to blow away the dust.

Shake the spray bottle finishes. It is sprayed uniformly on the surface of the furniture from the top and work down each side. Hold the nozzle on one leg piece, and keep it in motion. It is very light thin coat without dripping.

Let the first coat is dry to the touch (about an hour). Apply second coat in the same manner. Again, this is a very fine and uniform, work your way slowly around the entire piece and get the paint into all the cracks.

Let the second coat dry. The application of the third layer, if necessary. Let the last coat dry for two days before using the furniture.

If you are looking to buy rattan basket in Myanmar, visits at baganmart.com, which is myanmar B2B e-commerce platform and online shopping for myanmar business products buyers.

You might also like- 

• The Value of Teak Wood Furnitures in Myanmar
• Benefits Of Timber Flooring
• Advantages Of Floating Vinyl Plank Flooring

Compressed Air Dryer & Filter Installation

Compressed Air Dryer & Filter Installation

Compressed air dryers and the installation of the filter provides clean, dry compressed air to a equipment that uses air as a motive power. Filter and dry air to protect equipment from damage due to contaminants in the air, such as liquid water, steam, dust in the atmosphere, on a scale from internal surfaces of pipes and breakdown products of lubricants in the air compressor.

Considerations

The compressed air dryer and associated filter are selected based on several considerations. They begin with the volume and pressure of air must be clean and dry. Then look at the environment of the dryer and the filter will be: What are the surrounding temperature; you will be exposed to vibration? Another consideration is in dry form, that is, how low must be compressed air dew point. Availability of service and reliability, and other considerations. Another issue is that requires continued operation of compressed air systems.

Compressed Air Dryers

There are three common types of compressed air dryers: single-tower dryer, regenerative dryer and refrigerated dryer.

The single-tower dryer is filled with a desiccant dissolved deliquescent as it absorbs water vapor. Liquid desiccant must be emptied periodically and replaced with fresh desiccant. This is usually done only a few times a year. A single tower dryer requires no external power source.

Regeneration or two tower dryer, a tower used for drying compressed air, while the other tower dryer having its moisture removed. Dryer dried (regenerated) by means of heat or an air bled off from the active tower. Regenerative dryer is used when the flow of compressed air is continuous.

The cooled compressed air dehumidifier using a cooling unit for condensing water vapor in the compressed air and a water separator to remove liquid water. Refrigerated dryer can provide the supply of compressed air with a dew point of 35 to 38 degrees Fahrenheit. Refrigerated air driers are used for supplying air to the air temperature control systems. They do well in a clean temperature-controlled environment room.

Select the type of compressed air dryer is based on an analysis of its use, positioning, available power and pneumatic equipment served. If more than one type will do the job, then the cost of the initial cost, reliability and maintenance of additional considerations.

Compressed Air Filters

Compressed air filters protect the dryer and the equipment using compressed air from damage. There are two types of filter elements, coalescing and particulate.

Particulate filters remove particles that are not removed by the compressor air pre-filter cleaning and other particles. Coalescing filters pollutants together so that they can be captured by the filter element. Selection of the type of filter used is based on an assessment of the various contaminants that may be present.

If you are want to view and buy air dryer and filter, visits baganmart.com, which is myanmar B2B e-commerce platform and online shopping for myanmar business products buyers.

You might also like-

• How To Choose The Right Air Compressor
• The Value of Teak Wood Furnitures in Myanmar
• How to Set Up a Construction Site Crane

How To Choose The Right Air Compressor

How To Choose The Right Air Compressor

Air compressors have been around for over 100 years and have many uses as there are tools which use air. One reason for their popularity is that the air as a resource is safe, flexible, clean and comfortable. These machines have become highly reliable pieces of equipment that are almost indispensable in most applications they serve. Compressors can come in many different types and sizes.

Ultimately, as with any tool, air tools and compressors that manage to save user time and money for a specific project. Most of the compressed air tools are more powerful and thus lighter than standard cordless tools or power tools with the battery general. They are used in almost all industries from aircraft to automobiles to dairy farming to textiles.

While many types of compressors exist, they all perform the same function which is to increase the pressure and reduce the amount of gas, such as air. The most common type of compressor work by filling a chamber with air, and then reduce the volume of the chamber. They are called positive displacement compressors. They are the most widely available compressors, reciprocating, rotary screw and rotary vane compressors include.

Of all positive compressors, reciprocating compressors of the reciprocating movement or the most widely available on the market and can be found in the range of very high power fraction. These compressors are sold throughout the world wide by many providers of mass and variety of retail outlets.

Rotary screw air compressor and the centrifugal compressors are also commonly found, but in a more industrial / commercial environment. They generally operate at rates much higher flow capacity and that makes them more expensive to purchase and operate.

If you want to view and buy rotarty screw air compressor in myanmar, visits at baganmart.com, which is myanmar B2B e-commerce platform and online shopping for myanmar business products buyers.

You might also like-

• The Value of Teak Wood Furnitures in Myanmar
• Organic Coconut Oil Vs Virgin Coconut Oil
• The Best Advantages Of Electric Hoist

The Value of Teak Wood Furnitures in Myanmar

One of the tropical birch trees is teak tree. These trees can grow as tall as 120 feet and are located in Southeast Asia. Teak trees can live up to 100 years and is known as one of the most powerful, able to withstand strong winds without disturbing the trees. The tree grows in Indonesia, India, Myanmar, the Philippines and Malaysia. Teak wood is sought after for furniture, due to some features.

Durable Wood

Teak tree resin contains an oil in its heartwood, which makes it water resistant. Because of its strength, it is particularly useful to outdoor furniture. This will not warp or break, as well as other types of timber. The wood does not become brittle due to the high oil content.Teak can keep its shape for a long period of time. Teak wood myanmar furnitures has a life expectancy of 75 years.

Easy To Cut

Teak wood tree has a unique combination of oil and thick rubber fibers. This makes it much easier to cut than many other types of wood. This is one reason why it is highly valued by furniture manufacturers. Wood is a valuable feature of elasticity. Woodworkers can easily create beautiful and durable parts.

Beauty

Teak has a brightness that is not dull with age or exposure. Artisans can make elegant wooden furniture suitable teak furniture for many different venues.Teak can be found in the homes of the rich, who appreciate it for its beauty. Brightness is derived from abundant oil found in the wood.If you are look to buy teak wood furnitures in myanmar, visits at baganmart.com, which is myanmar B2B e-commerce platform and online shopping for myanmar business products buyers.

You might also like-

• Organic Coconut Oil Vs Virgin Coconut Oil
• Soft Shell Crab Recipe With Lemon, Butter and Capers
• How to Care for Rattan Furniture

Organic Coconut Oil Vs Extra Virgin Coconut Oil

Coconut oil can provide many advantages. Of healthy cooking oil with a mask for deep conditioning hair, coconut oil is versatile in its use. It is loaded with antioxidants, it helps protect the skin from free radicals. By living an organic life, coconut oil, as a rule, divided into refined and virgin coconut oil.

Refined

The main difference between virgin coconut oil and regular, organic coconut oil is the amount of refining the oil undergoes. Refined coconut oil means the oil that has been subjected to a drying process coconut. This type of coconut oil can be called deodorized or bleached, sometimes live in accordance with the organic life. Usually this is done outside the sun. In general, refined coconut oil conceived as a lower quality.

Unrefined

Unrefined coconut oil is also called virgin coconut oil. The type of a method for extracting coconut oil is in the most natural way. Thus, coconut oil remains in its natural form, without the use of any artificial filtering process is sometimes used in refined coconut oil. No chemicals are used in the coconut oil extraction process using this method.

Smell And Taste

Virgin coconut oil maintains a sweet smell and taste of the coconut, while refined coconut oil lose much of the flavor and odor. The easiest way to tell if unrefined coconut oil to run it a little in the palm of your hand. Unrefined coconut oil melts easily in the palm of your hand because your body temperature. Refined coconut oil is usually pretty solid unmelted.

Copra

Copra refers to the dried kernel or coconut meat. Refined coconut oil is used copras. The coconut oil produced from copra usually thicker consistency - notably thicker than virgin coconut oil. The oil is made from copra is too thick to be used as a moisturizer for the skin or hair conditioner, as it will sit on the skin without being absorbed. This can clog the pores and actually do more harm to the skin, which helps.

If you want to buy virgin coconut oil in myanmar, visits at bagantrade.com, which is Myanmar's first and the only B2B trading platform that engage local and global market.

You might also like-

• Soft Shell Crab Recipe With Lemon, Butter and Capers
• Great Ways To Use Coconut Oil
• How To Make Delicious Crab Legs?

Soft Shell Crab Recipe With Lemon, Butter and Capers

Ingredients: 

• Two soft shell crabs are fresh, clean and clear
• 1/4 cup cornstarch
• 2 ounces butter pastor
• juice of half a lemon, about 1 1/2 tablespoon lemon juice
• 2 tablespoons dry vermouth
• sea salt
• 1 tablespoon capers in brine, drained

Preparation:

• Clean soft shelled crabs, toss in cornstarch.
• The ability to ten inches melt butter over medium heat.
• When the butter is melted add soft shell crabs face up, and cook for 4 minutes.
• Turn, and sauttee for another 3 minutes, or until it is done.
• Salt the crabs with salt immediately after take them out of the pan.
• Set aside in a warm place for boiled crabs.
• add the juice, dry vermouth, lemon and capers in a saucepan and bring to a boil and cook until the sauce is included in its entirety. Pour over the crab.

Enjoy!

If you want to buy soft shell crab in myanmar, visits at bagantrade.com, which is Myanmar's first and the only B2B trading platform that engage local and global market.

You might also like-

1. How To Make Delicious Crab Legs?
2. How To Choose a CNC Cutting Machine
3. The Best Advantages Of Electric Hoist

How To Choose a CNC Cutting Machine

To select a CNC cutting machine more suitable, we must consider the following factors: the width of the cutting structure, the height adjustment mode cutoff mode.They burner may also be mounted together on request.

1). Cutting Breadth

Cutting width refers to the width and length of the effective cutting.

1) Take portable type as example, when our machine is installed on the plate should be considered Teo aspects: a, the size of the workpiece, you should make sure that the machine can cut in an hour; b, width of plate.When machine is placed on the plate, effective cutting width should be as long as plate width, in order to reduce the frequent movement our portable cutting.

2) On the other type which is the same, reducing the width of our machine is dependent on the characteristics of the plate to be cut. You must make sure that the machine can cut the workpiece during time.Otherwise, it is not convenient to move our machine time and again.For gantry structure, to improve efficiency, you can put two plates in the longitudinal direction or in the transverse direction at the same time.

2). Structure

We have a portable, cantilever, gantry and table type.

Portable console and type: easy to transport and install, compact, low cost.But effective width of the cut is limited.

Gantry type, good rigidity, cutting width can be up to 3-10m. But that need high requirements for precision and special plant installation area.

Table type is an integral part of the structure, with a fast and accurate placement, but the extent of the cut is limited.

3). Cutting Mode

Cutting mode can be classified from different perspectives:

Flame cutting, plasma cutting, two flame and plasma cutting;

Dry type plasma cutting and Under water plasma cutting;

CNC and Strip Cutting Machine (Linear cutting machine);

CNC intersection cutting (cutting pipe).

4). Torch Height adjusting mode

Regardless of the fact that the flame or plasma cutting, all that we need to ensure that the distance between the torch and the plate is most suitable for the best cut quality and extend the life of the cutting nozzle.

Torch height setting mode:

1). Manual adjustment

the wheel via the driving gear rack torch to adjust the height of the torch.

2). Electric adjusting

Click through the motor controller drive torch up and down.

The above statement, so you need to adjust the height of the torch.

3). Capacitive height controller for flame cutting

On the one hand, this device can automatically adjust the height of the torch to maintain a constant height; On the other hand, after preheating, when we open the high pressure cutting oxygen, there will be slag spatter.Thus it is easy to jam cutting nozzle.With the device before opening the high-pressure oxygen, torch is mounted in advance.After slag splashing down the torch itself, so that avoid nozzle jam.

4). Arc voltage height controller for plasma cutting

On the one hand, speed of plasma cutting very quickly, on the other hand, the plasma arc is very dazzling.As consequence, if traders are watching the distance between the cutting torch and the plate, at all times, they can not catch up with the cutting speed and your eyes can not see for the plasma arc long time..This still difficult, if the plate is very thin. So, which usually set the device by using plasma cutting.

If you are looking to buy CNC cutting machine in myanmar, visits at baganmart.com, which is Myanmar B2B e-commerce platform and online shopping for myanmar business products buyers.

You might also like- 

1. How To Arc Weld Stainless Steel?
2. How To Make Delicious Crab Legs?
3. How to Cut With an Arc Welder?

Natural Clay Myanmar- BaganMart.com

Natural Clay is one of manufacturing And distributions Company of Premium Japanese Clay Tiles Products.

How To Arc Weld Stainless Steel

Welding is an important component of any work of metal structures; weld ability can be very valuable to know, due to the high cost, have made the repair and sealing. Welding cost ranges from $ 25- $ 50 per hour. Imaging doing it yourself to save money and learn a valuable trade. Stainless steel welding becomes a skill highly valued with an increase in the use of stainless steel products; stainless steels welding projects ranging from welding a cracked sink to welding a leak on a grain bin.

ARC Welding Stainless Steel

Buying or renting SMAW, Shielded metal arc welding or Stick electrode welder at your equipment or rent equipment company.

Connect the welding machine to an outlet 220V, and then connect the wires supporting the grounding cable and welder electrode holder cord into the welder.

Welding of stainless steel requires special electrode. Buy stick electrode AWS E308 stainless steel welding.

Clean the surface for welding with a wire brush.

Attach the ground cable of the welding torch on a piece of steel welding.

Placing the electrode into the welder electrodes holder, positioning the electrode near where the welding will start and pull his helmet over his face.

Touch the electrode on the steel until it gets to the arc and start to weave the electrode from side to side and always keep arc centimeter or less away from the piece of steel you are welding.

Let the weld to cool for a minute, then use a welding hammer to chip off the slag from the top of the weld.

If you are looking to buy arc welding machine in myanmar, visits at baganmart.com, which is Myanmar B2B e-commerce platform and online shopping for myanmar business products buyers.

You might also like- 

1. How To Make Delicious Crab Legs?
2. Great Benefits Of Coconut Oil
3. Grate Ways To Decorate Swimming Pool

How To Make Delicious Crab Legs

Crab legs are delicious seafood dish that is quite easy to do. You can use the Dungeness, snow or Alaskan king crab legs for your recipes. Crab legs steamed or boiled common methods of cooking, but you can also bake the crab legs. Crab has a delightful aroma with a hint of lemon and melted butter. When serving crab legs, crab include biscuits (walnut cookies viable substitute) for each guest so they can get into the crab legs.

Boil

Fill a pot halfway with water. Add 1 ½ tbsp. salt to the water and bring to a boil over high heat.

Place the crab legs in the water once a boil and reduce heat to medium-high.

Simmer for crab legs from 6 to 7 minutes in the pot.

Take the crab legs from the pot and rinse briefly before serving.

Steam

Add 2 cups water and 1 tablespoon. sea salt in a large pot and cook over high heat.

Place a steamer basket in the pot after the water comes to a boil, and add the crab legs in a basket.

Return water to boiling, then crab legs steamed for 5 to 6 minutes. You should be able to smell cooked crab.

Remove the crab legs and serve with melted butter and lemon slices, cut-side.

Baked

Use cookies to break the crab legs in two or three places.

Combine the crab legs in a single layer on a baking sheet.

Brush melted butter over the crab legs and a little lemon juice.

Bake at 350 degrees for 8 minutes.

If you are looking to buy soft shell crab in myanmar, visits at bagantrade.com, which is Myanmar’s first and the only B2B trading platform that engage local and global market.

You might also like- 

1. Great Benefits Of Coconut Oil
2. How To Use A Circular Saw?
3. Economic Benefits Of IVECO Concrete Mixer Trucks

Great Benefits of Coconut Oil

​If you are new to this phenomenon, coconut oil is antifungal, anti-inflammatory, antibacterial, anti-cancer, antiviral product, infection-fighting, antioxidant, and more. The list goes on and on. So let's be clear: Coconut oil is the magic. It is a liquid when heated and hardens at room temperature. It has a strange magical powers that will make life better in almost every way. Check out the following list of 10 ways that you can use, and try to say that it does not sound a bit weird.

1. Grease pans with coconut oil instead of butter or cooking spray.
2. Put on the bottom of his feet to fight the fungus or athletes foot.
3. Throw in a tablespoon of hot tea to relieve the symptoms of colds and flu.
4. Hey, you can even use as a sexual lubricant.
5. Spread in place of butter in the dough.
6. Lather on your body to use as a great natural tanning oil.
7. Chocolate truffles.
8. Add a spoon in your coffee that provides an even greater increase in energy.
9. Rub into the scalp to stimulate hair growth and dandruff removal.
10. Dab on the skin to soothe chicken pox, poison ivy and eczema.

If you are looking to buy virgin coconut oil in myanmar, please visits at bagantrade.com, which is Myanmar's first and the only B2B trading platform that engage local and global market.

You might also like-

1. How To Use A Circular Saw?
2. Advantages & Disadvantages of Rotary Screw Air Compressors in Myanmar
3. Why should use POS System in a Restaurant?

How To Use A Circular Saw

Circular saw is one of the most convenient portable power tools, but it is potentially very dangerous. Make sure you understand how to use this tool safely.

Make sure you use the right knife and properly installed and tightened. Always use a sharp blade. Dull blades bind and overheat.

Check the blade guard. Is it in good condition and working properly?

Adjusting the blade depth of no more than one-quarter of an inch thick wood to be cut. The workpiece is likely to relax, if you have too much blade exposed.

Support on both sides. Place it on one side, if necessary.

Read Also: Advantages & Disadvantages of Rotary Screw Air Compressors in Myanmar

Look for knots and nails before you start. Avoid them if possible; if they can not be avoided, be careful when approaching them.

Start the blade before its meets the work.

Stand to the side when you was in the case of wood is kick back and not too fit. You should always have both feet planted firmly on the ground.

Do not push the saw, just guide it with a little pressure.

Shelves on the trigger, if the blade is attached, and a wooden wedge sticks to the court to release him.

Read Also: How Does Wheel Alignment Work?

Wait for the blade to stop before removing it from the timber.

If you want to buy and views details of circular saw, visits at Baganmart.com, which is Myanmar B2B e-commerce paltform and online shopping for Myanmar Business products buyers.

Read Also: Benefits Of Using A Small Cement Mixer

HIKVISION CCTV Camera in Myanmar

Hikvision is the leading supplier of video surveillance products and solutions in Myanmar.
If you are looking for CCTV camera in Myanmar, please visit :
http://baganmart.com/hikvision

Air compressor and Fire Security products of KGS Myanmar

KGS Myanmar is specialized in air compressor and Fire Security products including piston air compressor, screw air compressor, air dryer and fire-fighting accessories etc. Research, development, service and installation to the customer with one stop solution services.

Bagan Mart - Myanmar eCommerce platform

Myanmar B2B eCommerce, ျမန္မာလုပ္ငန္းရွင္မ်ား ေရာင္းဝယ္ရာ


BaganMart.com သည္ လုပ္ငန္းရွင္မ်ား အခ်င္းခ်င္း ခ်ိတ္ဆက္ေရာင္းဝယ္ ႏိုင္တဲ့ Myanmar B2B eCommerce marketplace တစ္ခုျဖစ္ပါတယ္။


BaganMart.com is the first and only Myanmar B2B eCommerce platform that engages domestic/local buyers and sellers. Baganmart.com is started by young passionate entrepreneurs in Yangon, Myanmar. Baganmart’s team is creating and providing a platform that will help local businesses to generate more sales and practice the smarter way of doing business in Myanmar. We are helping to boost the Myanmar Economy by making more business matching and more business sale transactions happens. Online shopping in Myanmar is getting popular as the internet connectivity improved over the last few years BaganMart’s team is dedicated to help local businesses (SMEs) by taking advantage of this new technology and committed to make a difference for the people of Myanmar through indirect contribution to the economy of Myanmar.