Circular saw is one of the most convenient portable power tools, but it is potentially very dangerous. Make sure you understand how to use this tool safely.
Make sure you use the right knife and properly installed and tightened. Always use a sharp blade. Dull blades bind and overheat.
Check the blade guard. Is it in good condition and working properly?
Adjusting the blade depth of no more than one-quarter of an inch thick wood to be cut. The workpiece is likely to relax, if you have too much blade exposed.
Support on both sides. Place it on one side, if necessary.
Read Also: Advantages & Disadvantages of Rotary Screw Air Compressors in Myanmar
Look for knots and nails before you start. Avoid them if possible; if they can not be avoided, be careful when approaching them.
Start the blade before its meets the work.
Stand to the side when you was in the case of wood is kick back and not too fit. You should always have both feet planted firmly on the ground.
Do not push the saw, just guide it with a little pressure.
Shelves on the trigger, if the blade is attached, and a wooden wedge sticks to the court to release him.
Read Also: How Does Wheel Alignment Work?
Wait for the blade to stop before removing it from the timber.
If you want to buy and views details of circular saw, visits at Baganmart.com, which is Myanmar B2B e-commerce paltform and online shopping for Myanmar Business products buyers.
Read Also: Benefits Of Using A Small Cement Mixer
No comments:
Post a Comment